AMP Econoseal III® Connectors

The AMP Econoseal III connector system was developed specifically to meet the exacting requirements of the automotive industry to specifically address the need for a high-reliability sealed connector system. Since the ranges inception it has steadily gained users in many other industrial sectors where a reliable sealed connector is required.

The range comprises of three series of connectors: -

• High current wire-to-wire
• Low current wire-to-wire
• Low current wire-to-board

Each series offers a choice of housing ways (2 to 36), polarised mating, discrete cable sealing and contact secondary locking. All connectors are designed for use with thin walled non-irradiated PVC cables.

Connect-2 Technology’s technical and production resources are fully conversant with the manufacturing disciplines required for producing assemblies with the Econoseal range for over a decade. Our Technical Department are always on hand to offer free advice and if required produce pre-production samples as part of your development requirements where necessary.

AMP Econoseal III Range .070 (1.8mm) & .250 (6.3mm) Summary:

• Lanceless contacts
• Wire-to-board & wire-to-wire connection capability
• Wire range 0.5-3.0 mm2
• Wire insulation: thin wall 1.6-3.4mm
• Sealed or unsealed
• Single wire seal or cavity plug
• Secondary contact locking
• Polarised mating
• Available in 2-36 position housings
• Up to 20A rating

As always, if you would like a quick quote please send your drawings/specifications to our contact details found here or Telephone 01642 492220.

AMP CPC® Series Connectors

As one of the world’s leading electrical/electronic connector manufacturers AMP have a long-standing history when it comes to leading the industry in quality and reliability. The AMP CPC range of circular connectors for commercial signal and power applications has been in use world-wide since the 1970’s and has to date developed to provide a comprehensive range of circular panel, chassis and cable-mounting connectors suitable for many industrial power and control uses.

Connect-2 Technology has been manufacturing cable assemblies with CPC connectors for over a decade, providing cost efficient solutions across a wide range of industry sectors from baggage handling systems and machine control to high –tech power systems. Our production staff and technicians have long experience across the full CPC (Circular Plastic) and CMC (Circular Plastic Metal-Shell) ranges and with a full roster of tooling Connect-2 Technology can provide customers with a highly reliable and cost effective solution for this industry standard range.

AMP CPC Series Features:

• Lightweight, all-plastic and metal-shell connectors.
• CPC connectors are UL94V-0 rated and made of stabilised, heat resistant, self-extinguishing thermoplastic material.
• Metal-shell CPC connector housings are manufactured in UL94V-0 rated thermoplastic.
• Operating temperature range: -55°C to 125°C.
• Available in panel or chassis and free-hanging configurations.
• Quick connect/disconnect capability with thread assist, positive detent coupling.
• Built-in pin and socket protection.
• Polarised for proper mating of connector halves.
• UL & CSA approved.
• 9 series of CPC circular connector ranges are available covering a wide variety of low, standard and high density requirements including up to 35A and up to 96A (Power IV Connectors).
• Also available is a MIL-C-5015 Style series.

As always, if you would like a quick quote please send your drawings/specifications to our contact details found here or Telephone 01642 492220.

AMP MATE-N-LOK® Series Connectors

AMP Soft Shell Pin and Socket connectors provide a highly reliable and economic means of grouping multiple-lead connections in computer, computer peripheral, business machines, entertainment appliances and many other types of commercial equipment. The electrical connector is an integral component in these applications. The AMP M&L range is broad with a series of eleven different families providing a comprehensive range of inter-connection solutions covering many requirements for routing increasingly complex electrical functions whilst maintaining maximum use of available space – see range summary below.


As a long-term producer of wiring assemblies manufactured with Mate-n-Lok connectors, Connect-2 Technology’s technical and production personnel have gained extensive experience in working with this range, having developed and produced thousands of assemblies and wiring harnesses for many customers since 1995. We stock large numbers of housings and terminals and hold auto tooling applicators for many of the crimp contacts available. Our Technical Department are always on hand to offer free advice and if required produce pre-production samples as part of your development requirements where necessary.


AMP MATE-N-LOK Range Summary:

• Universal MATE-N-LOK II
• Universal MATE-N-LOK
• Commercial MATE-N-LOK
• .156 MATE-N-LOK
• .140 MATE-N-LOK
• .093 [2.36mm] Commercial Pin and Socket
• Micro MATE-N-LOK 3mm
• Mini-Universal MATE-N-LOK 2
• Mini-Universal MATE-N-LOK – also available as sealed splashproof versions.
• (MR) Miniature Rectangular
• .062 [1.57mm] Commercial Pin and Socket

Available from 2 to 24 circuits.
Housings available in UL94V-0 flammability rating.
Wire sizes from 30AWG to 10AWG.
Voltage rating: 250VAC, 600VAC & 600VDC (range dependent).
Dielectric withstand voltage between adjacent circuits: From 1KVAC to 5KVAC & 10KVDC (range dependent).

For full information on the AMP MATE-N-LOK range visit here (PDF 4.72mb).
As always, if you would like a quick quote please send your drawings/specifications to our contact details found here or Telephone 01642 492220.