Molex® Wire-to-Board & Wire-to-Wire Connector Ranges

Since the company's formation in 1995 Connect-2 Technology has produced hundreds of thousands of wiring assemblies utilising a broad-range of Molex® wire-to-board and wire-to-wire connectors. The Molex crimp terminal ranges we support in the wire-to-board and wire-to-wire ranges have gradually increased, so that we now have auto and semi-automatic tooling to cover a large number of product families as follows: -

Molex PicoBlade (Pitch: 1.25mm [0.049"])

• Circuits: 2 to 15
• Current: 1A (26, 28, 30AWG)
• Mated Height: 3.40mm [0.138")

Designed for high-density harness applications, PicoBlade provides the same 1.0 amperes of current as similar 2.00mm (.079") pitch systems, but in a more compact space-saving design. The PicoBlade range is offered in wire-to-board and wire-to-wire options. The system saves about 45% of PCB space compared to typical 2.00mm wire-to-board systems. It is a single row system, available in 2 to 15 circuits, with both surface mount and through-hole headers.

Bulgin 400 Series Buccaneer Connector Range

Bulgin 400 Series Buccaneer Specifications:

• Water and Dustproof to IP68 (when mated or capped)
• UL94V-0 Flammability Rating
• Tough Polyamide Housing
• 2, 3, 4, 6, 8, 10 & 12 Poles
• 4 Body Styles; Cable Flex, Cable In-Line, Panel Single-Hole, Panel Flange-Mount
• Pin or Socket Connection Choices in each Body Style
• Gold Plated Contacts
• Diameter Over Coupling Ring = 19.1mm
• Cable Range; 3.0 – 9mm O.D.
• Current Rating; 8A(2,3 Pole), 5A(4,6,8 Pole), 1A(10,12 Pole)
• Voltage Rating; 250V, 4,6,8 Pole(125V), 10,12 Pole(50V)
• Operating Temperature; -40°C to +80°C
• Approvals; UL, CSA & VDE

Connect-2 Technology can manufacture a wide range of cable assemblies using any of the Bulgin connectors with a huge selection of cable stock to your specific requirements.

As always, if you would like a quick quote please send your drawings/specifications to our contact details found here or Telephone 01642 492220.

Bulgin Mini Series Buccaneer Connector Range

Bulgin Mini Series Buccaneer Specifications:

• Water and Dustproof to IP68 (when mated or capped)
• UL94V-0 Flammability Rating
• Tough Polyamide Housing
• 2, 3, 4, 6, 8 Poles
• 50 Ohm & 75 Ohm BNC
• 5 Body Styles; Cable Flex, Cable In-Line, Panel Single-Hole, Panel Flange-Mount
• Pin or Socket Connection Choices in each Body Style
• Diameter Over Coupling Ring = 26.0mm
• Cable Range; 3.5 – 9mm O.D.
• Current Rating; 10A(2,3 Pole), 6A(4 Pole), 3A(6 Pole), 5A(8 Pole)
• Voltage Rating; 250V, 8 Pole(380V)
• Operating Temperature; -20°C to +70°C
• Approvals; UL

Connect-2 Technology can manufacture a wide range of cable assemblies using any of the Bulgin connectors with a huge selection of cable stock to your specific requirements.

As always, if you would like a quick quote please send your drawings/specifications to our contact details found here or Telephone 01642 492220.

Bulgin Standard Series Buccaneer Connector Range

Bulgin Standard Series Buccaneer Specifications:

·

• Water and Dustproof to IP68 (when mated or capped)
• UL94V-HB Flammability Rating
• Tough Glass Filled Polyamide Housing
• 2, 3, 4, 6, 7, 9, 12 & 25 Poles
• 50 Ohm & 75 Ohm BNC
• 5 Body Styles; Cable Flex, Cable In-Line, Panel Single-Hole, Panel Flange-Mount
• Pin or Socket Connection Choices in each Body Style
• Diameter Over Coupling Ring = 38.0mm
• Cable Range; 3.5 – 9mm O.D.
• Current Rating UL & CSA; 10A(2,3 Pole), 6A(4 Pole), 3A(6,7 Pole), 5A(9,12 Pole), 1A(25 Pole)
• Current Rating VDE; 12A(2,3 Pole), 10A(4 Pole), 5A(6,7,9,12 Pole), 1A(25 Pole)
• Voltage Rating; 250V, 9 Pole(150V), 12 & 25 Pole(50V)
• Operating Temperature; -20°C to +70°C
• Approvals; UL, CSA & VDE

Connect-2 Technology can manufacture a wide range of cable assemblies using any of the Bulgin connectors with a huge selection of cable stock to your specific requirements.

As always, if you would like a quick quote please send your drawings/specifications to our contact details found here or Telephone 01642 492220.

900 Series Buccaneer Connector Range

Bulgin 900 Series Buccaneer Specifications:

• Water and Dustproof to IP68 (when mated or capped)
• UL94V-0 Flammability Rating
• Tough Polyamide Housing
• 2, 3, 4, 5, 7 & 10 Poles
• 4 Body Styles; Cable Flex, Cable In-Line, Panel Single-Hole, Panel Flange-Mount
• Pin or Socket Connection Choices in each Body Style
• Leading Earth Contact for 3, 4, 5, 7 & 10 Pole Versions
• Diameter Over Coupling Ring = 57.7mm
• Cable Range; 13 – 22mm O.D.
• Current Rating; 32A, 10 Pole(10A)
• Voltage Rating; 600V, 7 Pole(430V), 10 Pole(250V)
• Operating Temperature; -40°C to +85°C
• Approvals; UL, CSA & VDE

Connect-2 Technology can manufacture a wide range of cable assemblies using any of the Bulgin connectors with a huge selection of cable stock to your specific requirements.

As always, if you would like a quick quote please send your drawings/specifications to our contact details found here or Telephone 01642 492220.

Bulgin Waterproof Connector Range

Are you looking for a highly reliable and cost effective solution for waterproof cable assemblies in either an internal or external environment where protection against the ingress of dust and moisture to IP68 is a system requirement?

If so, then we can highly recommend the Bulgin Buccaneer® range of IP68 power connectors. Connect-2 Technology has produced many cable assemblies with this range over a number of years including the latest addition, the 400 Series Bucaneer.

This multi-pole Power Range provides:-

full IP68 rated environment sealing
circular connectors
secure screw mating of connectors
safe electrical connections in harsh or hostile conditions
each range has cable, in-line and panel mount options
wide number of pole options from 2 to 25
includes BNC options

RANGE SUMMARY

900 Series Buccaneer®:

Standard Buccaneer®:

Mini Buccaneer®:

400 Series Buccaneer®:

For specific information on each of the Bulgin Waterproof Connector Ranges, please see following posts. Thank You!

JST PCB Wire-to-Board & Wire-to-Wire Connector Ranges

Over several years Connect-2 Technology has experienced a steady increase in customer demand for JST PCB crimp assemblies, which allow high reliability connection between PCBs and other equipment components. A large part of the demand has come due to JST’s commitment to their development in technology to keep pace with the ever shrinking nature of electronic circuit and product design.

The computational power of a room full of computer equipment from just a few decades ago, can now be stored in a briefcase. Just about any electronic product from common household items to medical instruments are now smaller, smarter and more efficient due to the relentless drive to downsize circuitry and increase functionality. JST’s connector ranges and the techniques developed to make them, have kept pace with and in some instances helped to enable these dramatic improvements.

Connect-2 Technology currently holds crimp applicator tooling for a number of JST’s crimp PCB and Wire-to-Wire connector ranges, which are summarised below. In addition if you have a JST requirement which is outside our current stock range then please contact us. Tooling and terminal/housing stock are normally quick and easy to arrange (subject to minimum reel sizes) and tooling costs are extremely reasonable (subject to 6 month minimum lease contract).
Connect-2 Technology Standard JST Stock Range:

Wire-to-Board Crimp style Connectors:

ZH connector 1.5mm pitch / Disconnectable.

The ZH connector is very small with a mounting height of 5.6mm and a thickness of only 3.5mm. Contact retention lances on the housing make insertion easier, while the dimple at the centre of the contact ensures reliable contact with the post.

• Compact, low profile design.
• Housing lances.
• Reliable contact construction.
• Distortion resistant construction.
• SMT and Through-hole PCB headers (top and side entry) available.
• Current rating: 1A AC/DC; Voltage rating: 50V AC/DC; Temp range: -25°C to +85°C.
• Applicable Wire Sizes: AWG #32 to #26.
• Wire Housing Circuits Available: 2 through 13.

PH connector 2.0mm pitch / Disconnectable.

This is a thin, low-profile 2.0mm pitch connector 8.0mm in height after mounting and 4.5mm in width. It is designed to meet the demand for high-density connection of internal wires to printed circuit boards in a compact, highly reliable and low cost package.

• Compact, low profile design.
• Housing lances.
• Reliable contact construction.
• Distortion resistant construction.
• SMT and Through-hole PCB headers (top and side entry) available.
• Current rating: 2A AC/DC; Voltage rating: 100V AC/DC; Temp range: -25°C to +85°C.
• Applicable Wire Sizes: AWG #32 to #24.
• Wire Housing Circuits Available: 2 through 16.

EH connector 2.5mm pitch / Disconnectable.

This, the thinnest, 2.5mm pitch connector, is 8.1mm in height after mounting and 3.8mm in width. It is designed to meet the demand for high-density connection of internal wires to printed circuit boards in a compact, highly reliable and low cost package.

• Compact and slim.
• Highly reliable contact.
• Polarizing guides.
• Distortion resistant construction.
• Current rating: 3A AC/DC (AWG #22); Voltage rating: 250V AC/DC; Temp range: -25°C to +85°C.
• Applicable Wire Sizes: AWG #32 to #22.
• Wire Housing Circuits Available: 2 through 15.

VH connector 3.96mm pitch / Disconnectable.

This small, field-proven connector range for printed circuit boards is reliable and has a large current carrying capacity. It can be used in conjunction with a wide variety of signal, power and output circuits.

• Proven box contact.
• Compact connector with a large capacity.
• Secure contact and mounting.
• Current rating: 10A AC/DC (AWG #16); Voltage rating: 250V AC/DC; Temp range: -25°C to +85°C.
• Applicable Wire Sizes: AWG #22 to #16.
• Wire Housing Circuits Available: 2, 3, 5, 7, 8 & 9.

Wire-to-Wire Crimp style Connectors:

SM connector 2.5mm pitch / Disconnectable.

The SM series are 2.5mm pitch, wire-to-wire connectors that perform reliably in high-density, small current applications.

• High contact pressure.
• Highly reliable housing construction.
• Mountable on a variety of panels.
• Arm lock mechanism.
• Current rating: 3A AC/DC; Voltage rating: 250V AC/DC; Temp range: -25°C to +85°C.
• Applicable Wire Sizes: AWG #28 to #22.
• Wire Housing Circuits Available: 2 through 18 – (Receptacle & Plug).

RCY connector 2.5mm pitch / Disconnectable.

The RCY connector is a compact, 2.5mm pitch wire-to-wire connector for use with a variety of circuits, in compact electrical equipment applications. The employment of a free spring contact method ensures stable contact performance.

• Spring contact construction effectively minimising stress from repeated insertion and removal at high temperatures .
• Compact design – when mated the overall length is just 23.3mm with a 4mm width.
  Due to the internal lock inside the housing accidental disconnect by external pressure is minimised.
• Current rating: 3A AC/DC; Voltage rating: 250V AC/DC; Temp range: -25°C to +85°C.
• Applicable Wire Sizes: AWG #28 to #22.
• Wire Housing Circuits Available: 2-way – (Receptacle & Plug).

As always, if you would like a quick quote please send your drawings/specifications to our contact details found here or Telephone 01642 492220.

Far East Manufactured Co-axial Cable Assemblies

Do you have requirements for co-axial cable assemblies in order volumes of 250pcs or more?

Do you need to cut cost but maintain quality?

If you answered yes to both these questions, then Connect-2 Technology can provide you with an outstanding Far East sourced range manufactured to your exact requirements and providing outstanding value.

We already provide a wide variety of co-axial assembly solutions to instrumentation, tele-comms, data-comms and broadcasting market sectors. As an example we recently provided a customer with an 300mm FME cable assembly (Bulkhead Plug to Jack) for sub £2.50 each for a quantity of just 500pcs.

Most standard, miniature, sub-miniature and micro-miniature co-axial types are available, such as: -

• BNC
• TNC
• F type
• Mini UHF
• FME
• SMA
• SMB
• SMC
• MCX
• MMCX
• etc.

As always, if you would like a quick quote please send your drawings/specifications to our contact details found here or Telephone 01642 492220.

AMP Econoseal III® Connectors

The AMP Econoseal III connector system was developed specifically to meet the exacting requirements of the automotive industry to specifically address the need for a high-reliability sealed connector system. Since the ranges inception it has steadily gained users in many other industrial sectors where a reliable sealed connector is required.

The range comprises of three series of connectors: -

• High current wire-to-wire
• Low current wire-to-wire
• Low current wire-to-board

Each series offers a choice of housing ways (2 to 36), polarised mating, discrete cable sealing and contact secondary locking. All connectors are designed for use with thin walled non-irradiated PVC cables.

Connect-2 Technology’s technical and production resources are fully conversant with the manufacturing disciplines required for producing assemblies with the Econoseal range for over a decade. Our Technical Department are always on hand to offer free advice and if required produce pre-production samples as part of your development requirements where necessary.

AMP Econoseal III Range .070 (1.8mm) & .250 (6.3mm) Summary:

• Lanceless contacts
• Wire-to-board & wire-to-wire connection capability
• Wire range 0.5-3.0 mm2
• Wire insulation: thin wall 1.6-3.4mm
• Sealed or unsealed
• Single wire seal or cavity plug
• Secondary contact locking
• Polarised mating
• Available in 2-36 position housings
• Up to 20A rating

As always, if you would like a quick quote please send your drawings/specifications to our contact details found here or Telephone 01642 492220.

AMP CPC® Series Connectors

As one of the world’s leading electrical/electronic connector manufacturers AMP have a long-standing history when it comes to leading the industry in quality and reliability. The AMP CPC range of circular connectors for commercial signal and power applications has been in use world-wide since the 1970’s and has to date developed to provide a comprehensive range of circular panel, chassis and cable-mounting connectors suitable for many industrial power and control uses.

Connect-2 Technology has been manufacturing cable assemblies with CPC connectors for over a decade, providing cost efficient solutions across a wide range of industry sectors from baggage handling systems and machine control to high –tech power systems. Our production staff and technicians have long experience across the full CPC (Circular Plastic) and CMC (Circular Plastic Metal-Shell) ranges and with a full roster of tooling Connect-2 Technology can provide customers with a highly reliable and cost effective solution for this industry standard range.

AMP CPC Series Features:

• Lightweight, all-plastic and metal-shell connectors.
• CPC connectors are UL94V-0 rated and made of stabilised, heat resistant, self-extinguishing thermoplastic material.
• Metal-shell CPC connector housings are manufactured in UL94V-0 rated thermoplastic.
• Operating temperature range: -55°C to 125°C.
• Available in panel or chassis and free-hanging configurations.
• Quick connect/disconnect capability with thread assist, positive detent coupling.
• Built-in pin and socket protection.
• Polarised for proper mating of connector halves.
• UL & CSA approved.
• 9 series of CPC circular connector ranges are available covering a wide variety of low, standard and high density requirements including up to 35A and up to 96A (Power IV Connectors).
• Also available is a MIL-C-5015 Style series.

As always, if you would like a quick quote please send your drawings/specifications to our contact details found here or Telephone 01642 492220.

AMP MATE-N-LOK® Series Connectors

AMP Soft Shell Pin and Socket connectors provide a highly reliable and economic means of grouping multiple-lead connections in computer, computer peripheral, business machines, entertainment appliances and many other types of commercial equipment. The electrical connector is an integral component in these applications. The AMP M&L range is broad with a series of eleven different families providing a comprehensive range of inter-connection solutions covering many requirements for routing increasingly complex electrical functions whilst maintaining maximum use of available space – see range summary below.


As a long-term producer of wiring assemblies manufactured with Mate-n-Lok connectors, Connect-2 Technology’s technical and production personnel have gained extensive experience in working with this range, having developed and produced thousands of assemblies and wiring harnesses for many customers since 1995. We stock large numbers of housings and terminals and hold auto tooling applicators for many of the crimp contacts available. Our Technical Department are always on hand to offer free advice and if required produce pre-production samples as part of your development requirements where necessary.


AMP MATE-N-LOK Range Summary:

• Universal MATE-N-LOK II
• Universal MATE-N-LOK
• Commercial MATE-N-LOK
• .156 MATE-N-LOK
• .140 MATE-N-LOK
• .093 [2.36mm] Commercial Pin and Socket
• Micro MATE-N-LOK 3mm
• Mini-Universal MATE-N-LOK 2
• Mini-Universal MATE-N-LOK – also available as sealed splashproof versions.
• (MR) Miniature Rectangular
• .062 [1.57mm] Commercial Pin and Socket

Available from 2 to 24 circuits.
Housings available in UL94V-0 flammability rating.
Wire sizes from 30AWG to 10AWG.
Voltage rating: 250VAC, 600VAC & 600VDC (range dependent).
Dielectric withstand voltage between adjacent circuits: From 1KVAC to 5KVAC & 10KVDC (range dependent).

For full information on the AMP MATE-N-LOK range visit here (PDF 4.72mb).
As always, if you would like a quick quote please send your drawings/specifications to our contact details found here or Telephone 01642 492220.

Mini RF Cable Assemblies

Connect-2 Technology now offer a wide range of miniature RF coax cable assemblies custom manufactured in the Far East to your exact specifications. Providing solutions for most popular GSM modem and Bluetooth requirements, applications include; radio communications equipment, instrumentation, GPS and GSM, wireless devices, etc.

Assemblies can be manufactured from a wide range of mini and micro RF cable types including, RG174 and a variety of diameters in Micro-Coax cables according to individual application requirements.

Connectors available include:-

• IPEX type MHF (fully compatible to Hirose U.FL).


• I-PEX type MHF-III (fully compatible to Hirose W.FL).

End two can be “Stripped & Tinned” or fitted with a different type of coaxial connector such as:-

• SMA


• SMB


• FME


• MMCX


• MCX


• TNC


• N-Type, etc.

All assemblies are 100% tested prior to shipment. This is a service via our Far East partner with production quantities delivered (after sample approval) normally 4 weeks (Air) and 6-7 weeks (Sea). The price we quote you will always include all charges, including your choice of shipment method (Air or Sea), customs and clearance charges and UK delivery.

As always, if you would like a quick quote please send your drawings/specifications to our contact details found here or Telephone 01642 492220.

Molex KK® Series Wire-to-Board Connectors

The Molex KK system is an industry established "building block" connector system used to produce a huge variety of “wire-to-board” interconnection assemblies. Connect-2 Technology has been providing customers with cost efficient solutions using the KK range for more than a decade. Utilising auto tooling, ‘in-depth’ stocking and years of experience we can provide exactly to your requirements for applications requiring 2.50mm (.09"), 2.54(.100"), 3.96 (.156") and 5.08mm (.200") centres.

The KK range provides a friction lock system together with a polarizing wall and/or location pegs to ensure correct assembly. This range has become an ‘industry standard’ due to its reliability and versatility.

Since 1995 Connect-2 Technology has manufactured many thousands of assemblies incorporating the KK connector range (in numerous combinations to many different customers), as such we hold large stocks of housings within our standard stock range together with tin plated, gold plated and phosphor bronze reeled terminals to enable fast turnaround and an exact match to your specific requirements.

Features:

• Available on 2.50mm (.098"), 2.54mm (.100"), 3.96mm (.156") and 5.08mm (.200") centre spacing.
• Polarization via insert-able keys and pegs, polarizing ribs or polarizing wall headers.
• Locking ramp for improved mated retention with locking headers.
• Many circuit sizes.
• Accepts KK gas tight crimp terminals.
• Mates with headers or pins in the board.
• Available with Tin, Gold, Select Gold or Phosphor Bronze plating.
• Connect-2 Technology holds considerable stock.
• Auto tooled to provide high reliability crimp termination.

Electrical:

• Voltage: 250V.
• Current: Phosphor Bronze: 4.0A max. Brass: 2.5A max.
• Dielectric Withstanding Voltage: 1500V AC.
• Insulation Resistance: 50K (High Pressure Version 500K) Megohms min.

Physical:

• Housing: Nylon UL 94V-2 or UL94V-0.
• Operating Temperature: 0 to +75°C.

If our services are relevant to your needs please contact us via the details on our web site (see info panel on the right above) or by email to myself – Geoff. Nossiter.

Product development

A major function of our technical engineering department is to convert customer drawings for the manufacturing process; developing work instructions, bills-of-materials, internal drawings, etc., to enable a smooth and accurate transition to a manufactured product. As part of this initial process we also add value where design for manufacture is required.

As a subcontract-manufacturing organisation it is vital that we fully understand our customers’ requirements which is why, when an assembly is being manufactured for the first time, it is meticulously checked and evaluated to ensure accuracy and compliance with all relevant component standards. Our engineers are trained to be ‘proactive’ and if they believe that an enhanced or more cost effective solution is available, then they will offer it to the customer.

When required Connect-2 Technology can also provide help and support from the outset of the design process, through to the pre-production stage, by jointly developing solutions and providing samples to ensure that projects are realised in a speedy and effective manner. Customer feedback is documented and filed as part of the requirements of our ISO 9001:2000 accreditation.

If our services are relevant to your needs please contact us via the details on our web site (see info panel on the right above) or by email to myself – Geoff. Nossiter.

Long-term reliable electrical connections

Many of our customers require considerable numbers of straightforward single lengths of wire processed with a wide variety of end-preparation options, ranging from insulated and un-insulated crimped terminals to precision tin-dipped ends and/or simple strip-length preparation.

An important factor in providing long-term reliable electrical connections is to ensure that all wiring is manufactured to the terminal manufacturers recommended specifications and tolerances. This will include precision cutting and stripping of the wire and crimp termination being made using only the correct tooling and strict conformance with the terminal manufacturers recommended tool settings. It is surprising how many times we still receive customer samples (either manufactured by customers themselves or second parties) with incorrectly applied crimp connections that may look OK visually but would not go anywhere close to the recommended pull-off force.

The quality practices and disciplines within Connect-2 Technology ensure customers always receive product manufactured to comply with specific recommended pull-off forces, ensuring long-term reliable connections.

We utilise a wide range of high-speed wire processing and termination equipment to enable fast and efficient production of medium/large quantities of terminated and/or prepared single wires quickly and accurately. Our tooling bank covers a vast range of both insulated and un-insulated terminals from AMP, Cembre, Elcon, Harting, JST, Molex, Takbro, etc.

We supply customers across many industry sectors including: - Aerospace and Defence, Communications & Data, Consumer Electronics, Industrial Control, Instrumentation, Power & Energy, Rail and Transportation. Typically, single wire ranges are from 0.03mm2 to 10mm2 (32AWG – 8AWG) for automated processing and up to 120mm2 with hydraulic cutting and termination.

World Class Connections

Extreme environments require highly specialised cable and connector solutions to provide totally dependable interconnections, ensuring the integrity of power and data transmissions between connected equipment. One such high value connector range is that of USA manufacturer Glenair, with a broad range covering military qualified and multi-purpose industrial connectors.

As a testament to Connect-2 Technology’s versatility and skill we have successfully undertaken a number of high profile assemblies for oil and gas industry projects incorporating Glenair’s “Geo-Marine®” range. This range has been specifically designed to offer a solution for a variety of oceanographic, geophysical and other extreme applications. Our assemblies have been used in some of the most demanding environments imaginable, working under extreme pressure within oil and gas structural surveying equipment.

If you have a similar requirement or would like a quick quote for standard assemblies and harnesses please send your drawings/specifications by email here or fax/post to the contact details found here.

Cat 5, Cat 5e, Cat 6 Cable Assemblies

We custom manufacture any configuration of Cat 5, Cat 5e & Cat 6 cable assemblies (UTP & STP) to any length you specify.

Fully moulded assemblies are manufactured by our Far East partner (minimum quantities as low as 500pcs.). We also custom manufacture a wide range of assemblies in the UK with high quality assembled components from a variety of manufacturers including Molex, Tyco, MH, Nexans, Draka, Minitran, etc (minimum order quantities as low as 50pcs.).

As always, if you would like a quick quote please send your drawings/specifications by email here or fax/post to the contact details found here.

Mains Cable Assemblies

For a number of years Connect-2 Technology has supplied a large number of customised mains cable assemblies to a wide range of customer specifications. These include open-ended configurations, straight or coiled cords, incorporating stripped cores with tinning and/or terminations to individual requirements, as well as over-moulding of grommets etc to exact requirements.

We supply a vast number of options including most country specific mains cord sets 100% individually tested with full BSI, VDE, D, N, S, UL, etc. approvals.

Manufactured by our partner company in China you are guaranteed a highly competitive price with quantities from as low as 500pcs. As an example we have recently supplied an IEC fully moulded socket lead at 3.5 metres (1.00mm2 x 3 cores) with a prepared open end at £ 1.43 net each – 2,500pcs scheduled 3 months.

As always, if you would like a quick quote please send your drawings/specifications by email here or fax/post to the contact details found here.

Amphenol 62-5358-14-04PC Connector Clearance

Due to the cancellation of a military contract on one of our customers we have been instructed to dispose of 250pcs of Amphenol receptacle part number 62-5358-14-04PC as soon as possible. Hence we are looking for offers over £7 net each, representing a considerable saving on the current list price.

If you are interested please contact us by email here or telephone 01642 492220.

Molex KK Wiring Assemblies

The Molex KK range of connectors is still amongst the most widely used by many of our customers for thousands of different wire-to-board and board-to-board applications. Over the last 12 years we have manufactured millions of assemblies utilising this series of “building block” connectors to create thousands of different configurations. The applications in which they have been used are vast and span most electronic sectors.

As the Molex KK interconnection system can provide all the options necessary to compliment PC board interconnection design requirements and provide a combination of reliability, versatility and cost performance the range is still extremely popular today.

Connect-2 Technology holds a wide range of housing stock and terminals in both 2.54mm (0.1”) and 3.96mm (0.156”) centres. All terminals are crimped using semi-automatic equipment to provide the most accurate and consistent terminations possible.

As always, if you would like a quick quote please send your drawing/specifications here.